Most ink cartridges come equipped with a fill hole from the manufacturer and in many cases it's just a matter of removing a plug from the hole and replacing it after refilling. Some other cartridges require drilling a small hole in the casing and using a plug to seal it. Plugs and tools are supplied with InkBank refill kits, but if you need more, find them here...
Note: Not all ink cartridges require re-sealing the fill hole. If you are using an existing hole (eg breather vent), don't seal it or the cartridge will not work.
Can't find or not sure what you're looking for? Contact us.
Oversize plug for Canon #3/5/6/8 ink tanks
Rubber plug (multi colour) for sealing Canon BCI-3/6, PGI-5, CLI-8 original cartridges with damaged fill hole. Use these, if you can't get a good seal with "C3" plug
Price:
Plug for Canon #520/521/525/526 tanks
Clear silicone plug for sealing Canon PGI-520/525, CLI521/526 (and similar) genuine ink tanks Special low profile plug prevents interference in late model Canon printers.
Self adhesive silver colour 12mm round sticker. Use to seall drill hole in many cartridges. (10 stickers)
Price:
Plug tool (puller)
Steel screw tip with plastic handle. Handy for removing plugs from ink cartridges HP#17/23/41/78/564/920 etc, Canon BCI-3/6, CLI-8/521/526, PGI-5/520/525, BC-01/02/20 etc.
Price:
Drill tool
2mm drill bit with plastic handle for drilling / enlarging fill holes in ink cartridges
